✨ New Arrivals Just Dropped!Explore
HomeStore
1990 Fender '72 Stratocaster ST72-75SC Yellow White Yngwie-Spec w/ Scalloped Board, Japan MIJ Fujigen
1990 Fender '72 Stratocaster ST72-75SC Yellow White Yngwie-Spec w/ Scalloped Board, Japan MIJ Fujigen
Up for sale, a 1990 Fender Stratocaster ‘72 vintage reissue model ST72-75SC in 100% original condition and in perfect working order. This uncommon “Made in Japan” Strat was crafted at the Fujigen factory during the golden age of Fender Japan production, essentially a progenitor of the Yngwie Malmsteen signature model ST72, sharing a scalloped fretboard and '72-centric features including a large headstock, bullet truss rod, three-bolt F neck plate, and block bridge saddles.
And while this Stratocaster boasts “ST72-86DSC” model stamps in the neck heel and pocket, this example lacks the factory DiMarzio pickups to substantiate the “D” in the model suffix, otherwise matching spec fo the ST72-75SC iteration of the Yngwie-style platform.
Tonewoods include a basswood body and one-piece maple neck, and this ST72-75 weighs 8lbs 1oz. The trio of alnico magnet single coils offer a range of traditional Strat tonalities, with chiming sparkle, percussive cut and bell-like sweetness on tap, plus hollow quack at the “in-between” positions on the five-way pickup selector switch. This Stratocaster ST72-75 has been professionally setup here at Mike & Mike’s Guitar Bar with 9-42 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Medium C, measuring .835” 1st fret, .910” 12th fret
-Fretboard: Maple, scalloped, 10" radius
-Frets: Slender, leveled/crowned, no wear
-Scale Length: 25 1/2”
-Nut: 1.650” (42mm), brass
-Headstock: Large ‘70s-style, block logo, “Custom Made” decal on back
-Tuners: Gotoh
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: “Order Made” stamps and handwritten model info on neck heel/pocket (inaccurate to instrument produced)
Body Specs:
-Wood: Basswood
-Pickups: ST-Vintage single coil x3
-Harness: Untouched solder, full-size Japanese pots date to May, 1990
-Hardware: Synchronized Tremolo with block saddles, jack cup
-Plastics: Three-ply pickguard, aged knobs and pickup covers
There are two repaired splits in the neck pocket, one on the treble-side cutaway and the other between the neck pocket and neck pickup route. Cosmetic wear on the gloss Yellow White (factory-aged Olympic White) finish includes a large chip on the perimeter at the treble-side lower bout and smaller dings consistent with use, largely limited to the lower bout. The ambered gloss on the neck profile is smooth and clean.
And while this Stratocaster boasts “ST72-86DSC” model stamps in the neck heel and pocket, this example lacks the factory DiMarzio pickups to substantiate the “D” in the model suffix, otherwise matching spec fo the ST72-75SC iteration of the Yngwie-style platform.
Tonewoods include a basswood body and one-piece maple neck, and this ST72-75 weighs 8lbs 1oz. The trio of alnico magnet single coils offer a range of traditional Strat tonalities, with chiming sparkle, percussive cut and bell-like sweetness on tap, plus hollow quack at the “in-between” positions on the five-way pickup selector switch. This Stratocaster ST72-75 has been professionally setup here at Mike & Mike’s Guitar Bar with 9-42 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Medium C, measuring .835” 1st fret, .910” 12th fret
-Fretboard: Maple, scalloped, 10" radius
-Frets: Slender, leveled/crowned, no wear
-Scale Length: 25 1/2”
-Nut: 1.650” (42mm), brass
-Headstock: Large ‘70s-style, block logo, “Custom Made” decal on back
-Tuners: Gotoh
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: “Order Made” stamps and handwritten model info on neck heel/pocket (inaccurate to instrument produced)
Body Specs:
-Wood: Basswood
-Pickups: ST-Vintage single coil x3
-Harness: Untouched solder, full-size Japanese pots date to May, 1990
-Hardware: Synchronized Tremolo with block saddles, jack cup
-Plastics: Three-ply pickguard, aged knobs and pickup covers
There are two repaired splits in the neck pocket, one on the treble-side cutaway and the other between the neck pocket and neck pickup route. Cosmetic wear on the gloss Yellow White (factory-aged Olympic White) finish includes a large chip on the perimeter at the treble-side lower bout and smaller dings consistent with use, largely limited to the lower bout. The ambered gloss on the neck profile is smooth and clean.
$1,379.99
1990 Fender '72 Stratocaster ST72-75SC Yellow White Yngwie-Spec w/ Scalloped Board, Japan MIJ Fujigen—
$1,379.99
Description
Up for sale, a 1990 Fender Stratocaster ‘72 vintage reissue model ST72-75SC in 100% original condition and in perfect working order. This uncommon “Made in Japan” Strat was crafted at the Fujigen factory during the golden age of Fender Japan production, essentially a progenitor of the Yngwie Malmsteen signature model ST72, sharing a scalloped fretboard and '72-centric features including a large headstock, bullet truss rod, three-bolt F neck plate, and block bridge saddles.
And while this Stratocaster boasts “ST72-86DSC” model stamps in the neck heel and pocket, this example lacks the factory DiMarzio pickups to substantiate the “D” in the model suffix, otherwise matching spec fo the ST72-75SC iteration of the Yngwie-style platform.
Tonewoods include a basswood body and one-piece maple neck, and this ST72-75 weighs 8lbs 1oz. The trio of alnico magnet single coils offer a range of traditional Strat tonalities, with chiming sparkle, percussive cut and bell-like sweetness on tap, plus hollow quack at the “in-between” positions on the five-way pickup selector switch. This Stratocaster ST72-75 has been professionally setup here at Mike & Mike’s Guitar Bar with 9-42 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Medium C, measuring .835” 1st fret, .910” 12th fret
-Fretboard: Maple, scalloped, 10" radius
-Frets: Slender, leveled/crowned, no wear
-Scale Length: 25 1/2”
-Nut: 1.650” (42mm), brass
-Headstock: Large ‘70s-style, block logo, “Custom Made” decal on back
-Tuners: Gotoh
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: “Order Made” stamps and handwritten model info on neck heel/pocket (inaccurate to instrument produced)
Body Specs:
-Wood: Basswood
-Pickups: ST-Vintage single coil x3
-Harness: Untouched solder, full-size Japanese pots date to May, 1990
-Hardware: Synchronized Tremolo with block saddles, jack cup
-Plastics: Three-ply pickguard, aged knobs and pickup covers
There are two repaired splits in the neck pocket, one on the treble-side cutaway and the other between the neck pocket and neck pickup route. Cosmetic wear on the gloss Yellow White (factory-aged Olympic White) finish includes a large chip on the perimeter at the treble-side lower bout and smaller dings consistent with use, largely limited to the lower bout. The ambered gloss on the neck profile is smooth and clean.
And while this Stratocaster boasts “ST72-86DSC” model stamps in the neck heel and pocket, this example lacks the factory DiMarzio pickups to substantiate the “D” in the model suffix, otherwise matching spec fo the ST72-75SC iteration of the Yngwie-style platform.
Tonewoods include a basswood body and one-piece maple neck, and this ST72-75 weighs 8lbs 1oz. The trio of alnico magnet single coils offer a range of traditional Strat tonalities, with chiming sparkle, percussive cut and bell-like sweetness on tap, plus hollow quack at the “in-between” positions on the five-way pickup selector switch. This Stratocaster ST72-75 has been professionally setup here at Mike & Mike’s Guitar Bar with 9-42 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Medium C, measuring .835” 1st fret, .910” 12th fret
-Fretboard: Maple, scalloped, 10" radius
-Frets: Slender, leveled/crowned, no wear
-Scale Length: 25 1/2”
-Nut: 1.650” (42mm), brass
-Headstock: Large ‘70s-style, block logo, “Custom Made” decal on back
-Tuners: Gotoh
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: “Order Made” stamps and handwritten model info on neck heel/pocket (inaccurate to instrument produced)
Body Specs:
-Wood: Basswood
-Pickups: ST-Vintage single coil x3
-Harness: Untouched solder, full-size Japanese pots date to May, 1990
-Hardware: Synchronized Tremolo with block saddles, jack cup
-Plastics: Three-ply pickguard, aged knobs and pickup covers
There are two repaired splits in the neck pocket, one on the treble-side cutaway and the other between the neck pocket and neck pickup route. Cosmetic wear on the gloss Yellow White (factory-aged Olympic White) finish includes a large chip on the perimeter at the treble-side lower bout and smaller dings consistent with use, largely limited to the lower bout. The ambered gloss on the neck profile is smooth and clean.
